Proudly Serving These Industries...

• Industrial Machinery  • Water  
• Agriculture • Ground Support
• Mobile • Waste
• Energy (Wind, Steam, Coal, Hydro)     • Entertainment
• Marine • Defense
 

 

   
HYDRAULIC FITTINGS  

MF2000 

TWO PIECE FITTINGS

The core of the Manuli fittings range, the MF2000 product line comprises a number of families designed for different applications and assembly methodologies. The two-piece nature of the range means that each assembled fitting requires a termination end fitting and a suitable ferrule. Intelligent product selection therefore allows for reduced stock-holding, as ferrules are typically suitable for many different termination end types.

Multifit (MF) 
Simple, cost effective universal solution for wire spiral and wire braid hoses

Interlock Plus (IP)
Maximum reliability for very high pressure wire spiral hoses in heavy-duty applications

Interlock Super (IS)
High-tech crimped fittings for very large bore wire spiral hoses 
Read More...

 

Spiralfit (SF)
No-skive solution for wire spiral and large bore hoses

Xtralock (XL)
Specifically designed for ultra-high pressure hydraulic power lines

Blastlock (BL)
Ultra-high pressure insert for water-blasting applications

Minifit (MN)
Extremely compact fittings for small bore, wire braid hoses

Pushlock (PL)
Insert solution for low pressure applications without the need for a crimped ferrule

Manuli MF2000 fittings are manufactured with an eco-friendly, zinc plating treatment for high corrosion resistance, and most references are made from solid stock without welding.

Optional, on-demand alternative plating treatments include zinc-nickel (ZnNi) as well as our proprietary Supa-Black coating, which extends the service life of fittings by up to 300%; guaranteeing a minimum of 2,000 hours to red rust under salt-spray conditions.

   

MF3000 

ONE PIECE FITTINGS

Designed to eliminate the possibility of using the wrong ferrule-fitting combination, the MF3000 one piece fitting range is becoming more and more popular with assemblers. Made up of a fitting with the suitable ferrule pre-crimped onto it, the MF3000 range is ideal for both OEM and aftermarket use.

The MF3000 range includes two families designed to cover most of the commonly used sizes and pressure ratings:

One-Piece Flat (OPF)
No-skive, compact, flat-crimp fittings for wire braid hoses up to 1”

One-Piece Kompact (OPK)
No-skive, compact, flat-crimp fittings for wire braid and wire spiral high pressure hoses up to 2”

Manuli MF3000 fittings are manufactured with an eco-friendly, zinc plating treatment for high corrosion resistance, with zinc-nickel and Supa-Black coatings available on demand.

 

pdfgray

Hydraulic Fittings


SMART FITTINGS  
 
ROTOFIT

Rotofit is the well-known Manuli Hydraulics solution designed to eliminate hose twist under external torques

Hose twist can be a major contributor to premature failure of the hose assembly. Rotofit is a ‘Direct-to-Hose” and “Direct-to-Port” solution, meaning that it eliminates the need for adaptors, and so minimises the number of potential leak points.

Although Rotofit was originally designed primarily for OEM usage, the “Direct-to-Hose” design of the fitting means that it does not dramatically increase the length of a hose assembly, meaning that this solution can also be applied retrospectively if hose failure due to external torques becomes evident in the field.

   
 
EASYFIT

Easyfit is the “threadless” fitting solution from Manuli Hydraulics. Enabling quick and easy installation of assemblies, Easyfit requires a simple axial push to create a leak-proof, high performance seal. On connection, Easyfit self-aligns thus improving the service life of the hose assembly by removing any undesirable twist in the hose.

The easy connect / disconnect process minimises maintenance time and effort, whilst the slimline fitting profile makes installation in restricted spaces far easier.

Easyfit is a ‘Direct-to-Hose” and “Direct-to-Port” solution, meaning that it eliminates the need for adaptors, and so minimises the number of potential leak points.

   
 
FASTFIT

Fastfit consists of a male “plug” that connects directly to the hose, and a female “cartridge” which connects directly to the port. This “one plug” connection concept allows easy and safe connection without the need for tools, making it ideal for use in restricted spaces and in complex configurations. 

Fastfit is available with a wide range of cartridges to suit most standard ports, including BSP, SAE, Metric and NPTF.

 

pdfgray

Hydraulic Fittings