Proudly Serving These Industries...

• Industrial Machinery  • Water  
• Agriculture • Ground Support
• Mobile • Waste
• Energy (Wind, Steam, Coal, Hydro)     • Entertainment
• Marine • Defense
 

 

Supplier

Electro-Hydraulic Valves

Description

PDF

 

PowrFlow™ Proportional Control Valves with On-Board Electronics

  • Valves are preset to catalog specifications
  • GUI (Graphic User Interface) software comes with each valve (RS232 port)
    • Set-up screens
    • Diagnostics screens
    • Down loadable
  • Five Flow Metering Options
    • Meter IN 
    • Meter OUT 
    • Equal Metering 
    • 2:1 Metering 
    • 1.3:1 Metering 
  • Six Nominal Flow Rates from .8 GPM rated to 9 GPM rated
  • Three spool centered conditions
  • Industry standard 7-pin connector for power and command signals connection
  • Fast Response
  • All valves utilize true centering spring for failure to a safe position
  • Hall Effect spool position sensor for closed inner loop operation
  • Standard Mountings – NFPA and ISO Standard
  • Standard 3-year warranty

Options and Accessories

  • 12 or 24 VDC Coil Voltages
  • Single or Dual solenoid options
  • Electrical and mounting Connectors
  • Adjustable Pressure compensators
    • Restrictive style
    • By-Pass style
  • Power Supplies
  • Mounting Subplates /manifolds and inline bodies

PowrFlow Electro-hydraulic Proportional and Servo Control Products

 

On-Board Electro-Hydraulic Products

 


Electro-Hydraulic Proportional Relief Valves
Relief valves with manual control allow you to simply regulate maximum pressure. Models with electric vent control are available in either “normally-open” or “normally-closed” configurations.
Electro-hydraulic models provide remote control for infinitely variable pressure settings up to the maximum pressure.
H8819 SERIES
50 GPM at 15,000 PSI (190 l/min. at 1040 bar)
75 GPM at 9,000 PSI (284 l/min. at 620 bar)

H8819 Series


 

Electro-Hydraulic Remote Proportional Actuators

A Remote Proportional Actuator (RPA)
produces output rod displacement
proportional to an electrical input
signal.
The RPA can be used to remotely
control variable displacement pumps
and motors. It can also stroke spools
of large valves, throttle controls,
clutches or brakes.

SA SERIES

1200 lbs (5,33 kN) Output Force

SA Series


Electro-Hydrauic Valves

Features:

  • The sensor in directional control valves is to monitor the spool position.
  • Valves without sensor are also available in both pressure control valves and directional control valves.
  • Open-loop types are also available.
  • EHDFG-04 and 06: 24V DC power supply is needed.
  • EHDFG-01, 03, 04 and 06: 0 to 5V DC command signal is needed.
  • EHDFG-04 and 06: The spool displacement is shown as a percentage.

Types:

  • Pilot Relief Valves
  • Pressure Control Valves
  • Relief Valves
  • Relieving and Reducing Valves
  • Flow Control (and Check) Valves
  • Flow Control and Relief Valves
  • High Flow Series
  • Flow Control and Relief Valves
  • Directional and Flow Control Valves
  • High Respones Type
  • Directional and Flow Control Valves

Electro-hydrauic Valves